Oil & Gas Equipment and Skids Packages
As produced wellhead fluids – crude oil, natural gas, and brine must be processed before the sale, transport, reinjection, or disposal. Therefore, oil and gas production involves several surface-unit operations between the wellhead and the point of custody transfer or transport from the production facilities. Multitex has gained its core competence in the development of various packages for the processing of crude and Gas, including the treatment and disposal of the water produced.
Our offered solutions are suitably designed for onshore and offshore design conditions. Our solutions for the offshore include certifications like DOSH for Malaysia, DNV/ ABS Marine Class certifications / Approvals, and structural integrity as per the yaw/roll/ heave and pitch moments. As an extension to our offered solutions & services, our team has necessary certified training for both offshore and onshore.
Components of Oil & Gas Equipment
Multi Cyclone Scrubbers
Knock Out Drum Skid
Fuel Gas Conditioning Skid
Glycol Dehydration Skid
Amine Filtration Package
Indirect Fired Heaters (Water Bath / Glycol Bath) Hot Oil Heaters / Thermic Fluid Heaters / Pressurized Water heaters
Test Separator
3-Phase Production Separator / Free Water Knock Out Drums
Heater Treater
Slug Catcher
Electrostatic Coalescer
Desalter
Nut Shell and Deep Bed Media Filters
They are used to remove liquid and dry impurities at the wellhead, the inlet to the Transmission Stations in the distribution system & many industrial processors.
They are designed to remove fine suspended droplets (mist) from the gas stream.
We design and manufacture a full range of fuel gas conditioning skids to provide clean, dry, metered Gas at the required pressure and temperature. Our customized solutions include offshore critical packages like Primary & Secondary Skids, Instrument Utility Gas Skids, and Instrument Gas Dryers for FPSO topsides and Offshore Process Platforms. The offshore solutions are designed either as per the end-user specifications or OEMs like Rolls Royce, Solar turbines, etc.
We design and manufacture, customized Glycol Dehydration skid to remove dissolved water and also CO2 from wet saturated Gas by using liquid desiccant (Glycol).
The filter section typically includes a mechanical pre-coat type filter, to remove solid particles from the solution followed by activated carbon filters, which remove chemical contaminants such as surfactants, large hydrocarbon molecules, and degradation products, the last stage is filtration on cartridge guard filters.
Indirect Fired Heaters are available in two types, water bath, and glycol bath, for outlet temperatures of process fluids up to 160°C or above.
Hot Oil/Pressurized water heaters along with complete integrated pumping solutions, fine operational and process controls along with performance heating, and Reboilers/Exchangers are offered to meet the process requirements as per the specifications in the industry.
Hot Oil/Pressurized water heaters along with complete integrated pumping solutions, fine operational and process controls along with performance heating, and Reboilers/Exchangers are offered to meet the process requirements as per the specifications in the industry.
Test separators are equipped with different meters to identify the oil, water, and gas rates. These are important to diagnose well problems, evaluate the production performance of individual wells, and manage reserves properly.
Three-phase separator for separating produced well fluid into Gas, oil, and water streams along with sand jet systems and proprietary internals. Our customized solutions are field-proven, take necessary care not only for the right residence time but also the right choice of instruments. We offer stand-alone and skid-mounted separators, both for onshore facilities and offshore platforms and topsides on FPSO.
They are designed to carry out the process of oil-gas separation, free water removal, heating, settling, and washing of crude oil all within a single compact unit.
It is a piece of equipment that is used in upstream production facilities to remove slug from the gas stream or downstream of pipeline and pigging operations.
We provide Electrostatic Coalescer/Dehydration Equipment. Our design is suited for heavy crudes as low as 16° API.
Desalters are electrostatic coalescers used to remove salt and other contaminants from crude oil before the crude distillation process in the refinery.
We offer a Nut Shell deep-bed design for contaminant retention and reduce backwash frequency. The detailed design of the filter fixed internals is critical to the successful long-term operation of the filter. Both top and bottom distributors have triple functions.
Multi Cyclone Scrubbers
They are used to remove liquid and dry impurities at the wellhead, the inlet to the Transmission Stations in the distribution system & many industrial processors.
Knock Out Drum Skid
They are designed to remove fine suspended droplets (mist) from the gas stream.
Fuel Gas Conditioning Skid
We design and manufacture a full range of fuel gas conditioning skids to provide clean, dry, metered Gas at the required pressure and temperature. Our customized solutions include offshore critical packages like Primary & Secondary Skids, Instrument Utility Gas Skids, and Instrument Gas Dryers for FPSO topsides and Offshore Process Platforms. The offshore solutions are designed either as per the end-user specifications or OEMs like Rolls Royce, Solar turbines, etc.
Glycol Dehydration Skid
We design and manufacture, customized Glycol Dehydration skid to remove dissolved water and also CO2 from wet saturated Gas by using liquid desiccant (Glycol).
Amine Filtration Package
The filter section typically includes a mechanical pre-coat type filter, to remove solid particles from the solution followed by activated carbon filters, which remove chemical contaminants such as surfactants, large hydrocarbon molecules, and degradation products, the last stage is filtration on cartridge guard filters.
Indirect Fired Heaters (Water Bath / Glycol Bath) Hot Oil Heaters / Thermic Fluid Heaters / Pressurized Water heaters
Indirect Fired Heaters are available in two types, water bath, and glycol bath, for outlet temperatures of process fluids up to 160°C or above.
Hot Oil/Pressurized water heaters along with complete integrated pumping solutions, fine operational and process controls along with performance heating, and Reboilers/Exchangers are offered to meet the process requirements as per the specifications in the industry.
Hot Oil/Pressurized water heaters along with complete integrated pumping solutions, fine operational and process controls along with performance heating, and Reboilers/Exchangers are offered to meet the process requirements as per the specifications in the industry.
Test Separator
Test separators are equipped with different meters to identify the oil, water, and gas rates. These are important to diagnose well problems, evaluate the production performance of individual wells, and manage reserves properly.
3-Phase Production Separator / Free Water Knock Out Drums
Three-phase separator for separating produced well fluid into Gas, oil, and water streams along with sand jet systems and proprietary internals. Our customized solutions are field-proven, take necessary care not only for the right residence time but also the right choice of instruments. We offer stand-alone and skid-mounted separators, both for onshore facilities and offshore platforms and topsides on FPSO.
Heater Treater
They are designed to carry out the process of oil-gas separation, free water removal, heating, settling, and washing of crude oil all within a single compact unit.
Slug Catcher
It is a piece of equipment that is used in upstream production facilities to remove slug from the gas stream or downstream of pipeline and pigging operations.
Electrostatic Coalescer
We provide Electrostatic Coalescer/Dehydration Equipment. Our design is suited for heavy crudes as low as 16° API.
Desalter
Desalters are electrostatic coalescers used to remove salt and other contaminants from crude oil before the crude distillation process in the refinery.
Nut Shell and Deep Bed Media Filters
We offer a Nut Shell deep-bed design for contaminant retention and reduce backwash frequency. The detailed design of the filter fixed internals is critical to the successful long-term operation of the filter. Both top and bottom distributors have triple functions.