Energy Division
Multitex is the preferred choice of many OEMs for Gas Turbines, Gas Compressors, Steam Turbines, and Pumps as part of our engineered solutions, which is critical for the performance of their capital-intensive units and its low maintenance.
Multitex has outperformed in the area of gas-based power plants, by delivering in a single shot, in a year, 56 Modular Skids as Fuel Gas Conditioning systems for 17 GE Frame 9 FA gas turbines.
Multitex has outperformed in the area of gas-based power plants, by delivering in a single shot, in a year, 56 Modular Skids as Fuel Gas Conditioning systems for 17 GE Frame 9 FA gas turbines.
Similarly, we have delivered our engineered solutions to almost every Thermal and Nuclear Power Plant in India, including supercritical projects.
Under the same group, we have offered engineered package solutions to UAE Desalination plants and Kuwait MEW for their critical application for seawater application.
Under the same group, we have offered engineered package solutions to UAE Desalination plants and Kuwait MEW for their critical application for seawater application.
Thermal / Nuclear / IWPP Power Plants and Desalination Units
Condenser tube cleaning system
Debris filters and Automatic filters
Low-pressure drop Strainers
The Condenser Online Tube Cleaning System (COLTCS) is intended to prevent the formation of various forms of fouling and scaling in the condenser tubes. We have leading approvals with NTPC, BHEL, NPCIL, Toshiba, Siemens, Alstom, etc .
This filter is essential to prevent macro-fouling from debris in cooling water circuits. Wherever Marco fouling occurs, such as in the heat exchanger, condenser, or cooling tower, and protection of downstream equipment becomes essential, debris filters are vital components to use. We have leading approvals with NTPC, BHEL, NPCIL, Toshiba, Siemens, Alstom, etc.
Low-pressure drop LPD Y, Basket, Duplex – strainer consists of a large screen, a good number of holes, and a large surface area. It has no bridge wall, hence enables the fluid to flow smoothly with low turbulence at a lesser velocity and therefore minimizes the pressure drop. Our low-pressure drop strainers test for rated flow and have been proven and certified in many labs for a full range of flow versus pressure drop. We have, for several years, been a preferred choice with many pump OEMs like KSB and end-users like NTPC.
Condenser tube cleaning system
The Condenser Online Tube Cleaning System (COLTCS) is intended to prevent the formation of various forms of fouling and scaling in the condenser tubes. We have leading approvals with NTPC, BHEL, NPCIL, Toshiba, Siemens, Alstom, etc .
Debris filters and Automatic filters
This filter is essential to prevent macro-fouling from debris in cooling water circuits. Wherever Marco fouling occurs, such as in the heat exchanger, condenser, or cooling tower, and protection of downstream equipment becomes essential, debris filters are vital components to use. We have leading approvals with NTPC, BHEL, NPCIL, Toshiba, Siemens, Alstom, etc.
Low-pressure drop Strainers
Low-pressure drop LPD Y, Basket, Duplex – strainer consists of a large screen, a good number of holes, and a large surface area. It has no bridge wall, hence enables the fluid to flow smoothly with low turbulence at a lesser velocity and therefore minimizes the pressure drop. Our low-pressure drop strainers test for rated flow and have been proven and certified in many labs for a full range of flow versus pressure drop. We have, for several years, been a preferred choice with many pump OEMs like KSB and end-users like NTPC.
Gas / IWPP Power Plant
Fuel Gas Regulating and fiscal metering stations for OEMs turbines and compressors and RMS Stations for the cross-country pipelines.
Hydrate inhibition and Dew point heating systems
Black Powder Filtration
Liquid to Gas conversion projects for fuel gas treatment
To meet pipeline specifications as per the Fiscal/ Custody Transfer codes, (like MDEC in UAE by ADWEA or GAIL India, etc.) for cross-country lines, sales gas needs to be free from dust particles, dry, pressure regulated, and HCV/LCV need to be within a prescribed range. The quality is to be monitored real-time for billing, and different source of Gas makes it more critical, and hence the system needs to be very accurate. Multitex has a wide range of experience in this application and supports its end users including consumers of sales gas and Gas pipeline owners to establish the rules of transfer of fuel right from the battery limit point and ensure the reliability of the results
The dew point is the temperature at which the natural Gas becomes saturated with moisture. In the saturated state, the maximum amount of moisture is found in the Gas. Depending on process conditions, this can lead to hydrate formation or accumulation of moisture in liquid form. The dew point heating system raises the stable temperature above the dew point to remove excessive moisture and also further ensure good temperature rise to avoid hydrate formation.
Gas transmission lines usually get contaminated with iron sulfide, iron oxides, and other contaminants. The black powder filtration system removes these impurities from pipeline equipment. Black powder is known to be detrimental to downstream critical equipment.
In many industries, cogeneration power plants are being converted from time to time based on fuel economics or environmental reasons. The current trend of using HCNG or conversion from Naphtha to Natural Gas or Diesel to Natural Gas, calls for not only changes in OEM power units but also the treatment of fuel requirements that needs to be modified. Multitex has wide experience and has been associated with many projects with end-user or OEMs for compressors or turbines to meet the new requirements in existing plants.
Fuel Gas Regulating and fiscal metering stations for OEMs turbines and compressors and RMS Stations for the cross-country pipelines.
To meet pipeline specifications as per the Fiscal/ Custody Transfer codes, (like MDEC in UAE by ADWEA or GAIL India, etc.) for cross-country lines, sales gas needs to be free from dust particles, dry, pressure regulated, and HCV/LCV need to be within a prescribed range. The quality is to be monitored real-time for billing, and different source of Gas makes it more critical, and hence the system needs to be very accurate. Multitex has a wide range of experience in this application and supports its end users including consumers of sales gas and Gas pipeline owners to establish the rules of transfer of fuel right from the battery limit point and ensure the reliability of the results
Hydrate inhibition and Dew point heating systems
The dew point is the temperature at which the natural Gas becomes saturated with moisture. In the saturated state, the maximum amount of moisture is found in the Gas. Depending on process conditions, this can lead to hydrate formation or accumulation of moisture in liquid form. The dew point heating system raises the stable temperature above the dew point to remove excessive moisture and also further ensure good temperature rise to avoid hydrate formation.
Black Powder Filtration
Gas transmission lines usually get contaminated with iron sulfide, iron oxides, and other contaminants. The black powder filtration system removes these impurities from pipeline equipment. Black powder is known to be detrimental to downstream critical equipment.
Liquid to Gas conversion projects for fuel gas treatment
In many industries, cogeneration power plants are being converted from time to time based on fuel economics or environmental reasons. The current trend of using HCNG or conversion from Naphtha to Natural Gas or Diesel to Natural Gas, calls for not only changes in OEM power units but also the treatment of fuel requirements that needs to be modified. Multitex has wide experience and has been associated with many projects with end-user or OEMs for compressors or turbines to meet the new requirements in existing plants.