Multitex Group | Filtration and Separation Equipment

Filtration & Separation Equipment

filteration-pipes

Filtration and Separation Process

The Filtration and Separation process is essentially one of the most important processes in the Process Industry. The contaminants must be removed from the working fluid medium. It is important to have effective solutions through the Filtration and Separation equipment and solutions should be well supported with after sales supports and site training. Not having these support systems in place could not only damage the capital-intensive equipment but also upset the whole process. Multitex covers the whole cycle for reliable and complete support to end users.
Broadly filtration and separation fall under the following categories - Solid-Gas, Solid-Liquid, Liq-Liq.
Solid - GasGas Filters, Scrubbers, Strainers, Filter Separators, Mist Eliminators, Magnetic Filters
Solid – LiquidStrainers, Feed Filters, Media Filters, Activated Carbon/ Mol Sieve, Pre-Coat filters
Liq - LiqFilter Water Separators, Diesel Coalescers, De-Oilers

Applications:

Gas Pipelines / RMS Stations / Compressor Stations to Custody / Fiscal SpecProduce Water Treatment
Product Filtration in refineries (Gasoline, Kerosene, Jet Fuel, Naptha, etc.) to licensors specCooling Water
DHDS, GTL (Salt Dryers), SRU, SWS, Co-Generation Power Unit, PSA Hydrogen, etc.OEM Turbines / Compressors
Aviation Fuel Terminals / Depots, Fueling Stations, Bauser Units, etc.Chemical Plants, Glycol, Amine, HCL, etc.
Oil and Gas Separation UpstreamFlared Gas API KODs
Sulfuric Acid Plant UnitsFertilizer Plants Units, reciprocating compressors

Special Features from Multitex

Certified Training, Prototype & Internals Testing, and R&D for Innovation & Analysis.

The range of filter performance is vast – 0.3 micron to 50- micron acceptable limits by some machines without harm for a range of working mediums and applications.

A vast range of factors make it essential to select the right filtration solution for the application, and as Multitex we take pride to offer you a single-point solution to cover the full range of filtration and solutions for complex applications; in various materials of construction.

Components of Filtration and Separation

Gas Filters

Scrubbers

Strainers

Automatic Self-Cleaning Filters and Strainers

Filter Separators (Gas – Liquid)

Coalescers (Liquid – Liquid)

Liquid Cartridge Filters (Liquid-Solid)

We offer a range of gas filters to remove dirt, dust, rust, condensate, moisture, exhaust fumes from industrial gases up to 0.3-micron particle size with low-pressure drop.
They are designed on the principle of separation with special internals designed on mechanical means like centrifugal force, Vanes, Demisters, or any other special and proprietary devices. Vertical and Horizontal options are available. Scrubbers are generally the first line of defence in pipelines or process stream and remove the bulk dirt, slugs, and liquids besides leaving outlet stream free from particles as low as 5 microns solid and liquid particles with an efficiency of 99.5 per cent.
We offer various types of strainers such as Basket, Y-Type, T-Type, Conical Type, Duplex, and special designs for a wide range of service fluids, for the protection from solid contents to strategical equipment such as pump, compressors, flow meter, etc.
We supply a range of filters and strainers as automatic backwash arrangements for critical applications. These use a small percentage of a process flow for intermittent flushing of the filter screen, allowing continuous, uninterrupted service. We have supplied such products for many critical applications as packaged solutions with PLC programming and meeting very low-pressure drops. They are used across a wide range of industries for different service fluids along with special backwash arrangements in which Multitex has gained special experience.
Filter separators are horizontal and vertical process equipment and are gas-liquid separators that are used to remove liquids from the flow stream. It also expels small solids and other particles out, which are created by tubing and wind erosion. The most commonly found separators are horizontal in shape. Multitex delivers separators with high efficiency, low liquid, and solid micron levels as per application requirements and specifications.
A Coalescer is a piece of process equipment used in the industry for removing water or hydrocarbon condensate. It is used in many critical applications at various stages, to meet product specifications as per industry requirements. It physically alters the droplet by mechanical and/or physical means. The mechanical type of coalescer is commonly used in the oil industries.
We offer a range of liquid filters to remove dirt, rust from HC, produce water and other service fluids up to 0.3-micron particle size, TDS, and ppm levels to specifications along with lower pressure drop.

Gas Filters

We offer a range of gas filters to remove dirt, dust, rust, condensate, moisture, exhaust fumes from industrial gases up to 0.3-micron particle size with low-pressure drop.

Scrubbers

They are designed on the principle of separation with special internals designed on mechanical means like centrifugal force, Vanes, Demisters, or any other special and proprietary devices. Vertical and Horizontal options are available. Scrubbers are generally the first line of defence in pipelines or process stream and remove the bulk dirt, slugs, and liquids besides leaving outlet stream free from particles as low as 5 microns solid and liquid particles with an efficiency of 99.5 per cent.

Strainers

We offer various types of strainers such as Basket, Y-Type, T-Type, Conical Type, Duplex, and special designs for a wide range of service fluids, for the protection from solid contents to strategical equipment such as pump, compressors, flow meter, etc.

Automatic Self-Cleaning Filters and Strainers

We supply a range of filters and strainers as automatic backwash arrangements for critical applications. These use a small percentage of a process flow for intermittent flushing of the filter screen, allowing continuous, uninterrupted service. We have supplied such products for many critical applications as packaged solutions with PLC programming and meeting very low-pressure drops. They are used across a wide range of industries for different service fluids along with special backwash arrangements in which Multitex has gained special experience.

Filter Separators (Gas – Liquid)

Filter separators are horizontal and vertical process equipment and are gas-liquid separators that are used to remove liquids from the flow stream. It also expels small solids and other particles out, which are created by tubing and wind erosion. The most commonly found separators are horizontal in shape. Multitex delivers separators with high efficiency, low liquid, and solid micron levels as per application requirements and specifications.

Coalescers (Liquid – Liquid)

A Coalescer is a piece of process equipment used in the industry for removing water or hydrocarbon condensate. It is used in many critical applications at various stages, to meet product specifications as per industry requirements. It physically alters the droplet by mechanical and/or physical means. The mechanical type of coalescer is commonly used in the oil industries.

Liquid Cartridge Filters (Liquid-Solid)

We offer a range of liquid filters to remove dirt, rust from HC, produce water and other service fluids up to 0.3-micron particle size, TDS, and ppm levels to specifications along with lower pressure drop.
Scroll to top